Cement Ball mill is a type of grinder used to grind materials into fine powder. It could be used to grind cement, limestone, gypsum, flay ash, clinker, barite, bauxite etc. It is equipment with air classfiier, dust collector etc.
Cement Ball mill is a type of grinder used to grind materials into fine powder. It could be used to grind cement, limestone, gypsum, flay ash, clinker, barite, bauxite etc. It is equipment with air classfiier, dust collector etc.
1.Dry ball mill is suitable for all kinds of metal ore, non-metal ore, including water will react to materials, such as cement, marble and other building stones, or require to be stored and sold in the form of powder products.
2.In addition, if the plant is located in the dry area with scarce water resources, dry ball mill is a good choice to save water.
3.Dry ball mill has strong adaptability to grind various materials, continuous production, easy to adjust the material fineness .
4.Dry ball mil can be used for open flow grinding system, and also suitable for circulating flow grinding system formed with air classifier.
The ball mill could be equipped with steel lining plate, high aluminum porcelain lining plate or rubber lining plate to meet different requirement.
Dry type Ball mill is widely used in cement, silicate, new construction material, refractory material, chemical fertilizer, ferrous metal, non-ferrous metal and ceramics.
It could add partition panel in ball mill cylinder. After rough grinding in 1st chamber , by partition plate, the material will enter 2nd chamber for fine grinding.
The dry grinding needs dry materials, so it can’t add water or other liquids during the dry milling process.
Cement ball mill machine is mainly composed of feeding part, discharging part, rotary part and driving part which includes reducer, small drive gear, electrical machine and electronic control. In powder grinding plant, ball grinding process flow includes crushing, milling,air classifying,packing,silos,bucket elevator,conveying,etc. Grinded material discharges from outlet grit fluently. Ball grinding mill is Formed a closed system with air classifier. Coarse material will be back to ball mill to grind again, and qualified material will go to be packed by worker or packing machine.
| Model | Cylinder Rotating Speed (r/min) | Ball weight (t) | Feeding Size (mm) | Discharging Size (mm) | Capacity (t/h) | Power (kw) |
| Ф900×1800 | 38 | 1.5 | ≤20 | 0.075-0.89 | 0.65-2 | 18.5 |
| Ф900×3000 | 38 | 2.7 | ≤20 | 0.075-0.89 | 1.1-3.5 | 22 |
| Ф1200×2400 | 35 | 4.6 | ≤25 | 0.075-0.6 | 1.6-5.8 | 37 |
| Ф1200×3000 | 36 | 3.5 | ≤25 | 0.074-0.4 | 1.6-5 | 37 |
| Ф1200×4500 | 35 | 5.5 | ≤25 | 0.074-0.4 | 1.6-5.8 | 55 |
| Ф1500×3000 | 29 | 9 | ≤25 | 0.074-0.4 | 2-7 | 75 |
| Ф1500×4500 | 27 | 11 | ≤25 | 0.074-0.4 | 3-6 | 110 |
| Ф1500×5700 | 29 | 17 | ≤25 | 0.074-0.4 | 3.5-6 | 110-130 |
| Ф1830×4500 | 25.4 | 15 | ≤25 | 0.074-0.4 | 4.5-12 | 155 |
| Ф1830×6400 | 24.1 | 21 | ≤25 | 0.074-0.4 | 6.5-15 | 210 |
| Ф1830×7000 | 24.1 | 23 | ≤25 | 0.074-0.4 | 7.5-17 | 245 |
| Ф2100×4500 | 23.7 | 24 | ≤25 | 0.074-0.4 | 8-43 | 245 |
| Ф2100×7000 | 23.7 | 26 | ≤25 | 0.074-0.4 | 8-48 | 280 |
| Ф2200×4500 | 21.5 | 27 | ≤25 | 0.074-0.4 | 9-45 | 280 |
| Ф2200×6500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 14-26 | 380 |
| Ф2200×7000 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-28 | 380 |
| Ф2400×3000 | 21 | 23 | ≤25 | 0.074-0.4 | 30-50 | 245 |
| Ф2400×4500 | 21 | 30 | ≤25 | 0.074-0.4 | 40-60 | 320 |
| Ф2700×3600 | 20.7 | 40 | ≤25 | 0.074-0.4 | 45-80 | 430 |
| Ф2700×4500 | 20.7 | 48 | ≤25 | 0.074-0.4 | 50-90 | 430 |
| Ф2700×13000 | 20.7 | 60 | ≤25 | 0.074-0.4 | 50-90 | 630 |
| Ф3200×4500 | 18 | 65 | ≤25 | 0.074-0.4 | — | 800 |
*The output will vary according to different materials, feed particle size and other factors
